Configure Ftp_User - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
example:
SR/configure> no ftp_server

configure ftp_user

show ftp
applies to:
All modules
configure ftp_user
This command configures a specific user for logging into an FTP server to transfer files to and
from the Secure Router.
parameter
user name
syntax:
configure [ no ] ftp_user user name < name >
example:
SR> configure ftp_user Alex
The system will prompt the user to enter a new password.
configure ftp_server
show ftp
applies to:
All modules
configure gui
This command enables the Graphic User Interface (GUI) on supported platforms. This
interface is available through HTTP using Internet Explorer (5.5+) and is therefore referred to
184 Avaya Secure Router 3120 Command Reference Guide
related commands:
The name of an approved user.
Only one user is supported.
related commands:
definition
December 2010