Configure Vlanfwd Management Default_Route - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE

configure vlanfwd management default_route

This command configures a default route (within a VLAN network itself) where off-network
traffic is forwarded.
parameter
gateway
interface
mac_address
syntax:
[ no ] default_route gateway < IP address > interface < ethernet0 | ethernet1 | bundle name |
bundle name:PVC number > [ mac_address < MAC address > ]
example:
SR/configure/vlanfwd/management> default_route 101.12.2.2 network_02 11:22:33:44:55:66
configure vlanfwd management add_host
configure vlanfwd management aging_interval
configure vlanfwd management disable_ipfwd
configure vlanfwd management ip_interface
configure vlanfwd management vlanid
applies to:
All modules
Note:
Both the gateway and interface must be on the same subnet.
configure vlanfwd management disable_ipfwd
This command enables or disables the forwarding of untagged IP packets.
syntax:
568 Avaya Secure Router 3120 Command Reference Guide
A gateway IP address
The outgoing interface name - ethernet0, ethernet1, or bundle
name
The gateway MAC address in the form of aa:bb:cc:dd:ee:ff
related commands:
definition
December 2010