Timeout Service - Avaya Secure Router 3120 Command Reference Manual

FIREWALL COMMANDS
dns-inactivity
time
example:
To configure TCP to timeout after waiting 1000 seconds, enter:
SR/configure/firewall global/timeout>
applies to:
All modules

timeout service

Configures the timeout service record.
syntax:
[no] service <name> | protocol <tcp | udp> <port> <time>
name
tcp
udp
port
time
example:
To create a UDP service named Test on port 4444, with a timeout value of 600 seconds, enter:
SR/configure/firewall global/timeout>
applies to:
All modules
954 Avaya Secure Router 3120 Command Reference Guide
parameter
parameter
definition
Specifies how long the Domain Name Service will wait
for a response.
The timeout value. The valid range is: 0—65535
seconds.
general tcp 1000
definition
The name of the service.
Specifies if the packet is TCP.
Specifies if the packet is UDP.
Specifies the port number for the service.
The timeout value. The range is 0—65535 seconds.
service Test udp 4444 600
December 2010