Help; Help Screen; Global Commands; Tree - Avaya Secure Router 3120 Command Reference Manual

Modular system that converges routing, security and multimedia traffic

Hide thumbs Also See for Secure Router 3120:

Table of Contents

Help

Type help at the main CLI prompt to see the basic Secure Router help information. Or, type

help followed by a command name to view information about that command.

To view help information for a command category, specific command, or a parameter, type the

associated word and a question mark (?). For example, if you type a question mark at the main

command prompt, the system command categories appear.

The default parameters for specific commands appear in parenthesis.

All show, ping, and save commands are available from any level of the CLI. For example, the

global show commands allow the user to view current configuration settings, alarms, or tests

without exiting the configure mode.

Similarly, the ping and save commands are available at any level of the CLI command. The

ping command verifies connectivity between the Secure Router and other network hosts;

access to the save commands from anywhere in the CLI ensures that your configurations may

be saved periodically.

The tab completion feature is not available for global commands.

You may view a tree that shows all CLI commands, or a tree that shows only the commands

associated with the current command mode (or the routing mode for example). If you type tree

at the main (SR> or equivalent) prompt, the entire list of system commands appears. If you

type tree within a command mode, such as SR/clear> tree, the commands associated with this

command mode are shown.

Avaya Secure Router 3120 Command Reference Guide

December 2010