Table of Contents
Advertisement
example:
SR/configure/reverse_telnet> set_parity 0
configure reverse_telnet enable
configure reverse_telnet set_baud_rate
configure reverse_telnet set_data_bits
configure reverse_telnet set_flow_control
configure reverse_telnet set_stop_bits
configure reverse_telnet telnet_port
configure reverse_telnet telnet_timeout
applies to:
All modules
configure reverse_telnet set_stop_bits
This command configures the stop bits for the second serial port.
parameter
stop_bits
syntax:
set_stop_bits stop_bits < n >
example:
SR/configure/reverse_telnet> set_stop_bits 2
configure reverse_telnet enable
configure reverse_telnet set_baud_rate
configure reverse_telnet set_data_bits
configure reverse_telnet set_flow_control
configure reverse_telnet set_parity
Avaya Secure Router 3120 Command Reference Guide
related commands:
The number of stop bits to configure.
The range is 1 - 2; the default is1.
related commands:
configure reverse_telnet set_stop_bits
definition
December 2010
491
Advertisement
Table of Contents
