Chapter 22: Test - Avaya Secure Router 3120 Command Reference Manual

Chapter 22: TEST

Use the test commands to conduct tests on WAN interfaces. You may also test the system fans and
temperature sensors.
The first-level test commands are as follows:
Table 54: Test Commands
test e1
test t1
test t3
test e1
This command accesses next-level commands for conducting tests on an E1 interface.
parameter
slot/port
e1_no
syntax:
e1 <slot/port> e1_no < n >
example:
SR/test> e1 1/1
test e1 bert
test e1 loopback
applies to:
All modules
Avaya Secure Router 3120 Command Reference Guide
The slot (1 or 2) in which the module is located. Port numbering
varies by module.
E1 link(s) to test.
'The range is 1 - 16, depending upon the system.
next-level commands
definition
December 2010 917