Debug Ip Ospf Packet Ls_Update - Avaya Secure Router 3120 Command Reference Manual

DEBUG
syntax:
ls_request [ direction < inbound | outbound > ]
example:
SR/debug/ip> ospf packet ls_request
debug ip ospf packet all
debug ip ospf packet dd
debug ip ospf packet hello
debug ip ospf packet ls_ack

debug ip ospf packet ls_update

applies to:
All modules
debug ip ospf packet ls_update
This command enables or disables debug messages for OSPF link state update packets.
Note:
The router must be in routing mode to access this debug command.
parameter
direction
inbound
outbound
syntax:
ls_update [ direction < inbound | outbound > ]
example:
SR/debug/ip> ospf packet ls_update
debug ip ospf packet all
debug ip ospf packet dd
612 Avaya Secure Router 3120 Command Reference Guide
related commands:
Packet direction
Inbound packets
Outbound packets
related commands:
definition
December 2010