Erase Flash-File-Name - Avaya Secure Router 3120 Command Reference Manual

CLEAR

erase flash-file-name

This command erases the specified file.
syntax:
flash-file-name <file name>
parameter
file name
example:
SR/erase> erase flash-file-name test.cfg
applies to:
All modules
erase startup-config
This command clears the contents of a system configuration file (.CFG).
The file name (but not the configuration) will remain in memory after executing this command.
parameter
file name
syntax:
cfg_file file name < name >
example:
SR/clear> cfg_file system.cfg
The above example clears the contents of the system.cfg file. To verify that you have cleared
the configuration file, use the show configuration stored or the show flash command.
The following screen shows the contents of system.cfg prior to clearing the file.
154 Avaya Secure Router 3120 Command Reference Guide
Specifies the file to be erased.
Name of file to be cleared.
The default is system.cfg.
definition
definition
December 2010