MULTICAST COMMANDS
show ip igmp groups
Displays IGMP group membership information.
syntax:
show ip igmp groups {all | <interface-name>} [detail]
parameter
all
interface name
detail
example:
The following example displays information on all IGMP groups:
SR> show ip igmp groups all
applies to:
All modules
show ip igmp interface all
Displays IGMP interface configuration:
syntax:
show ip igmp interface {all | <interface-name>}
parameter
all
interface name
example:
The following example displays all IGMP interface configuration information:
SR/configure/ip/igmp> show ip igmp interface all IGMP interface ethernet 1/0 information
interface: ethernet0 10.10.10.1/24, owner: IGMPV3 Querier: 10.10.10.1 (this
system)
762
Avaya Secure Router 3120 Command Reference Guide
Displays all IGMP group information
Displays IGMP group information only for the named interface, for
example ethernet1.
Displays in verbose mode.
Displays all information for all interfaces.
Displays configuration information for the named interface, for
example ethernet1.
Version: 2 Query Interval: 60 secs Query Response Interval: 300 secs Last member
definition
definition
December 2010