Configure Interface Ethernet - Avaya Secure Router 3120 Command Reference Manual

configure interface ethernet

This command accesses next-level commands for configuring an Ethernet port. Each router
has two Ethernet ports (0 and 1).
To view the current configuration of an Ethernet port, use the show interface ethernet
command. To view a summary of information for both ports, use the show interface ethernets
command.
<slot/port>
syntax:
interface ethernet ethernet <slot/port>
example:
SR/configure> interface ethernet 1/0
configure interface ethernet description
configure interface ethernet failover
configure interface ethernet icmp
configure interface ethernet ip
applies to:
All modules
configure interface ethernet description
This command provides a brief description for an Ethernet port.
The descriptive string, enclosed in quotation marks, can have up to 15 characters.
descr
Avaya Secure Router 3120 Command Reference Guide
parameter
next-level commands
parameter
definition
Number of the slot in which the Ethernet module is
located (1 or 2), and the port to be configured
(depends on module).
definition
Description
Use up to 15 characters; enclose in quotation marks.
configure interface ethernet
December 2010 327