Mtrace - Avaya Secure Router 3120 Command Reference Manual

Modular system that converges routing, security and multimedia traffic
Hide thumbs Also See for Secure Router 3120:
Table of Contents

Advertisement

Query Interval: 30 secs Last member Query Count: 7 Startup Query Interval: 1000 secs Startup
Query Count: 10 Send Router Alert: Enabled Require Router Alert: Enabled Ignore V1
Messages: Disabled Ignore V2 Messages: Disabled Robustness: 7 No of Joins on this
interface: 0 IGMP interface ethernet 1/1 information interface: ethernet1 192.168.123.100/24,
owner: PIM-SM Querier: 192.168.123.100 (this system) Version: 3 Query Interval: 125 secs
Query Response Interval: 10 secs Last member Query Interval: 1 secs Last member Query
Count: 4 Startup Query Interval: 31 secs Startup Query Count: 2 Send Router Alert: Enabled
Require Router Alert: Disabled Ignore V1 Messages: Enabled Ignore V2 Messages: Enabled
Robustness: 2 No of Joins on this interface: 0 SR/configure/ip/igmp>
applies to:
All modules

mtrace

Traces mutlicast routes. Use address 0.0.0.0 for the group address to invoke a weak mtrace. A
weak mtrace is one that follows the RPF path to the source, regardless of whether any router
along the path has multicast routing table state.
If the first mtrace request fails, three retries are supported with the hop count set with 1, 2 &
3. A '*' character will be displayed in case the mtrace request fails. Use Ctrl-C to abort the
mtrace.
To use this command, IGMP must be enabled in the router and on at least one interface.This
command is supported in all modes.
syntax:
mtrace source [destination] [group]
parameter
source
group
example:
To trace the route from 192.168.0.0 to 192.168.2.22 via group 225.254.254.254, enter:
SR> mtrace 192.168.0.0 192.168.2.22 239.254.254.254
Mtrace from 192.168.2.0 to 192.168.2.22 via group 225.254.254.254
Querying full reverse path...
1
192.168.2.15 PIM
2
192.168.2.7 PIM
3
192.168.2.5 PIM
Avaya Secure Router 3120 Command Reference Guide
The IP address or host name of a remote system of the multicast-
capable source. The default is 127.0.0.1.
The IP address or hostname of the group to be traced (default:
224.2.0.1
thresh^ 0
0 ms
thresh^ 0
2 ms
thresh^ 0
674 ms
definition
mtrace
December 2010
763

Advertisement

Table of Contents
loading

Table of Contents