Configure Interface Avc Vlan Router_Ip_Addr - Avaya Secure Router 3120 Command Reference Manual

configure interface avc vlan router_ip_addr

This command configures a remote router IP address for a VLAN ARP request.
syntax:
router_ip_addr ip_address < IP address >
example:
SR/configure/interface/avc wan08 22/vlan> router_ip_addr 100.43.2.1
configure interface avc vlan vlanid
applies to:
All modules
configure interface avc vlan vlan_ether_type
This command configures the VLAN Ethernet type, specific to this interface.
If this is not configured, the system-wide VLAN Ethertype that was configured using the
configure vlanfwd ether_type command is used.
parameter
vlan_ether_type
syntax:
[ no ] vlan_ether_type vlan_ether_type < n >
example:
SR/configure/interface/avc north 16/vlan> vlan_ether_type 1500
applies to:
All modules
Avaya Secure Router 3120 Command Reference Guide
related commands:
The Ethernet type in decimal format
The range is 1 - 65535; the default is 33024 (0x8100).
configure interface avc vlan router_ip_addr
definition
December 2010 203