Clear Ip Nat Interface Ethernet Address - Avaya Secure Router 3120 Command Reference Manual

CLEAR
After selecting an Ethernet port, use the commands that follow to clear specific NAT data.
parameter
ethernet_identifier
syntax:
ethernet ethernet_identifier < 0 | 1 >
example:
SR/clear/ip/nat/interface> ethernet 0

clear ip nat interface ethernet address

clear ip nat interface ethernet all
clear ip nat interface ethernet counters
clear ip nat interface ethernet dynamic
clear ip nat interface ethernet port
clear ip nat interface ethernet static
applies to:
All modules
clear ip nat interface ethernet address
This command clears a static IP address entry from an Ethernet port translation table.
parameter
ip_address
syntax:
address ip_address < IP address >
example:
SR/clear/ip/nat/interface/ethernet 0> address 10.1.100.4
clear ip nat interface ethernet all
132 Avaya Secure Router 3120 Command Reference Guide
Ethernet port to be cleared of NAT data
The values are 0 or 1.
next-level commands
IP address to be cleared from the NAT table.
related commands:
definition
definition
December 2010