Configure Module T3 Clock_Source - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
configure module t3 dsu
configure module t3 framing
configure module t3 enable
configure module t3 name
configure module t3 scramble
applies to:
Clear Channel T3

configure module t3 clock_source

This command specifies a transmit clock timing source for a Clear Channel T3 port.
The timing source can be either the internal clock of the Secure Router, or a clock recovered
from the incoming network T3 signal.
parameter
clock_source
internal
line
syntax:
clock_source clock_source < internal | line >
example:
SR/configure/module/t3 (1/1)> clock_source line
configure module t3 alarms
configure module t3 cable_length
configure module t3 dsu
configure module t3 framing
configure module t3 enable
configure module t3 name
configure module t3 scramble
438 Avaya Secure Router 3120 Command Reference Guide
related commands:
Transmit timing source
Secure Router's internal clock (default)
A clock recovered from the incoming T3 signal (network timing).
related commands:
definition
December 2010