Configure System Routing - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
reset-to-factory
example:
SR/configure/system> reset-to-factory
configure system carrier_type
configure system logging
configure system mac_range
configure Router
applies to:
All modules

configure system routing

This command configures dynamic routing. To turn off dynamic routing use the no form of this
command.
syntax:
routing
example:
SR/configure/system> routing
To preserve your configuration settings, use the save local command prior to issuing the
configure system routing command.
To turn off routing, enter:
SR/configure/system> no routing
configure system alarm_relay
configure system carrier_type
configure system logging
configure system mac_range
applies to:
All modules
554 Avaya Secure Router 3120 Command Reference Guide
related commands:
related commands:
December 2010