Configure Module Ct3 Enable - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE

configure module ct3 enable

This command enables T1 traffic from within a Channelized T3.
channel_no
syntax:
[ no ] enable channel_no
example:
SR/configure/module/ct3 (1/1)> enable 5
SR/configure/module/ct3 (1/1)> no enable 5
configure module ct3 alarms
configure module ct3 cable_length
configure module ct3 clock_source
configure module ct3 framing
configure module ct3 t1
applies to:
Channelized T3
configure module ct3 framing
This command sets the Channelized T3 port framing mode, which can be either C-bit parity or
M13.
framing
syntax:
478 Avaya Secure Router 3120 Command Reference Guide
parameter
related commands:
parameter
definition
T1 number. Can be individual T1 or a range
(1-28).
definition
c_bit - C_BIT framing (default)m13 - M13
framing
December 2010