Table of Contents
Advertisement
Chapter 5: CONFIGURE
Use the configure commands to configure an Avaya Secure Router 3120. You also can use these
commands to subsequently change a system that has been previously configured.
Configuration Methods
Before configuring a system, specify the source from which it will be configured. To do this,
go to the main CLI prompt and enter one of the commands described below.
configure network
Sets the Secure Router 3120 parameters from a configuration file on a network server. This
method downloads files via the TFTP protocol, then executes the commands from that file
without operator intervention. Use the configure network command if you want to configure
one or more Secure Routers with the same configuration.
syntax:
configure network
example:
SR> configure network
After you enter the configure network command, press Return, follow the prompt (as shown
below), and enter the configuration file path information.
host: Fremont01
file name (path): /networks/system01.cfg
configure telnet_server
Configures the Secure Router telnet server.
syntax: configure telnet_server
Avaya Secure Router 3120 Command Reference Guide
December 2010
157
Advertisement
Table of Contents
