Configure Ip Access-List Delete - Avaya Secure Router 3120 Command Reference Manual

FILTER LIST
1. SR/configure/ip/access-list Rules_01> add permit tcp 10.1.3.9/12
2. SR/configure/ip/access-list Rules_02> add deny icmp 10.1.20.9/32 any icmptype 8
3. SR/configure/ip/access-list Rules_03> add permit udp 10.1.10.7 any sport =12
4. SR/configure/ip/access-list Rules_04> add deny ip 10.1.100.2 255.255.255.0
The above command entries add four filtering rules to a filtering rule set (one each for the TCP,
UDP, ICMP, and IP protocols).

configure ip access-list delete

configure ip access-list insert
applies to:
All systems.
configure ip access-list delete
This command deletes a rule from an IP packet filtering rule set.
You must know the line number of the rule to delete it. To see the rules currently stored in a
rule set before or after deleting them, use the show ip access-list command. When you delete a
rule, the line numbers of successive rules in the list are revised accordingly.
rul_lineno
syntax:
delete rul_lineno < n >
example:
SR/configure/ip/access-list Rules_01> delete 3
configure ip access-list add
configure ip access-list insert
700 Avaya Secure Router 3120 Command Reference Guide
10.1.100.46/255.255.255.0 dport =23 flags established log on
icmpcode 0 log on
precedence 3 tos 2
precedence 5 tos 1 log on
parameter
related commands:
The line number of a specific rule set
The range is 1 - 65535.
related commands:
definition
December 2010