Configure Vlanfwd Management Add_Host - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE
example:
SR/configure/vlanfwd> management

configure vlanfwd management add_host

configure vlanfwd management aging_interval
configure vlanfwd management default_route
configure vlanfwd management disable_ipfwd
configure vlanfwd management ip_interface
configure vlanfwd management vlanid
applies to:
All modules
configure vlanfwd management add_host
This command adds a destination host to the VLAN management table.
parameter
ip_address
interface
mac_address
syntax:
add_host ip_address < IP address > interface < ethernet0 | ethernet1 | bundle name | bundle
name:PVC number > mac_address < MAC address >
example:
SR/configure/vlanfwd/management> add_host 101.12.2.1 network_01 11:22:33:44:55:66
configure vlanfwd management aging_interval
configure vlanfwd management default_route
configure vlanfwd management disable_ipfwd
configure vlanfwd management ip_interface
566 Avaya Secure Router 3120 Command Reference Guide
next-level commands
The host IP address
The outgoing interface name
Enter a bundle name or an Ethernet port (1 or 2).
The host MAC address in the form aa:bb:cc:dd:ee:ff
related commands:
definition
December 2010