FIREWALL COMMANDS
firewall stealth-mode
Stops the firewall sending TCP reset packets when there is no corresponding matching policy
for an incoming packet. This command is applicable for both firewall global and firewall map.
By default, this feature is disabled.
syntax:
[no] stealth-mode <map-name>
map-name
example:
To enable stealth mode for the map global, enter:
SR/configure/firewall global>
To disable stealth mode for the map global, enter:
SR/configure/firewall global>
To enable the stealth mode on corp. Any one of the following commands can be executed.
SR/configure/firewall corp> stealth-mode corp
or
SR/configure/firewall global> stealth-mode corp
or
SR/configure/firewall corp> stealth-mode
To disable the stealth mode on corp. Any one of the following commands can be executed.
SR/configure/firewall corp> no stealth-mode corp
or
SR/configure/firewall corp> no stealth-mode
or
SR/configure/firewall global> no stealth-mode corp
applies to:
All modules
956
Avaya Secure Router 3120 Command Reference Guide
parameter
stealth-mode global
no stealth-mode global
definition
The name of the map.
December 2010