Test T3 Loopback Line_T3 - Avaya Secure Router 3120 Command Reference Manual

TEST
show module test t3
applies to:
Clear Channel T3

test t3 loopback line_t3

This command activates a Clear Channel T3 line loopback.
The loopback sends an incoming Clear Channel T3 back to a remote system for line testing.
syntax:
[ no ] loopback line_t3
example:
SR/test/t3 1/1> loopback line_t3
To verify the loopback status during the test, use the show module test t3 command.
show module test t3
applies to:
Clear Channel T3
test t3 loopback local_t3
This command activates a local Clear Channel T3 loopback.
The local loopback routes the Clear Channel output signal to the Clear Channel receiver for
local testing.
syntax:
[ no ] loopback local_t3
example:
SR/test/t3 1/1> loopback local_t3
To verify the loopback status during a test, use the show module test t3 command.
930 Avaya Secure Router 3120 Command Reference Guide
related commands:
related commands:
December 2010