Configure Module Ct3 Clock_Source - Avaya Secure Router 3120 Command Reference Manual

configure module ct3 enable
configure module ct3 framing
configure module ct3 t1
applies to:
Channelized T3

configure module ct3 clock_source

This command specifies a transmit clock timing source for a Channelized T3 port. The timing
can be either the internal clock of the Secure Router, or a clock recovered from the incoming
network T3 signal.
clock_source
syntax:
clock_source clock_source < internal | line >
example:
SR/configure/module/ct3 (1/1)> clock_source line
configure module ct3 alarms
configure module ct3 cable_length
configure module ct3 enable
configure module ct3 framing
configure module ct3 t1
applies to:
Channelized T3
Avaya Secure Router 3120 Command Reference Guide
related commands:
parameter
related commands:
configure module ct3 clock_source
definition
Transmit timing source.
• internal - Secure Router's internal clock
(default).
• line - network timing from the incoming T3
signal.
December 2010 477