CONFIGURE
configure hostname
This command changes the Secure Router host name.
This name becomes the main command prompt. To view the current host name, use the show
hostname command.
The host name can have up to 15 characters. If you type a name exceeding that length, it will
automatically be shortened to xhost.
parameter
string
syntax:
hostname string < new host name >
example:
SR/configure> hostname Fremont
applies to:
All modules
configure interface
This command accesses next-level commands for configuring AVCs, WAN bundles, and
Ethernet ports for operation.
Sub-interfaces can be specified.
syntax:
interface
example 1:
SR/configure> interface
example 2:
To create sub-interface 1 on Ethernet1/0, at 192.168.1.20, enter:
SR/configure> interface ethernet 1/0.1
186
Avaya Secure Router 3120 Command Reference Guide
New host name for the system
Use up to 15 characters.
definition
December 2010