Configure Snmp-Server Enable Traps Snmp - Avaya Secure Router 3120 Command Reference Manual

CONFIGURE

configure snmp-server enable traps snmp

This command enables or disables traps for SNMP authentication and failure.
parameter
trap_auth
auth_fail
syntax:
snmp [ trap_auth < auth_fail > ]
example:
SR/configure/snmp/enable_trap> snmp auth_fail
configure snmp-server enable traps bgp
configure snmp-server enable traps bundle
configure snmp-server enable traps config
configure snmp-server enable traps environment
configure snmp-server enable traps failover
configure snmp-server enable traps frame_relay
configure snmp-server enable traps ospf
configure snmp-server enable traps sntp
configure snmp-server enable traps system
configure snmp-server enable traps vrrp
applies to:
All modules
configure snmp-server enable traps sntp
This command enables or disables SNMP client traps for the simple network timing protocol.
syntax:
510 Avaya Secure Router 3120 Command Reference Guide
Enable authentication failure trap
related commands:
definition
December 2010