Chapter 17: Multiple Spanning Tree
Use the procedures in this section to configure Multiple Spanning Tree Protocol (MSTP) on the Avaya
Secure Router 2330/4134.
Configuring the region name and revision number
Use the procedure in this section to configure the MSTP region name and revision number.
Procedure steps
1. To access configuration mode, enter:
2. To access the bridge command context, enter:
3. To access the MSTP command context, enter:
4. To configure the region name, enter:
5. To configure the revision number, enter:
Table 56: Variable definitions
<region-name>
<revision-number>
Configuration — Layer 2 Ethernet
Protocol configuration
configure terminal
bridge
mstp
region <region-name>
revision <revision-number>
Variable
Value
The name you specify for the MSTP region
(up to 32 characters).
The revision number that you assign. The
default value is 0. Valid values are 0 to 255.
July 2013
139