Guide To Time Of Replacement; Rush Current Suppression Relay Activation Time; Motor Thermal Protection; Braking Resistance Overload Curve - Toshiba TOSVERT VF-PS1 Instruction Manual

Variable torque inverter
Hide thumbs Also See for TOSVERT VF-PS1:
Table of Contents

Advertisement

6.26.17 Guide to time of replacement

: Annual average ambient temperature
• Function
You can set the inverter so that it will calculate the remaining useful life of the cooling fan, main circuit
capacitor and on-board capacitor from the ON time of the inverter, the operating time of the motor, the
output current (load factor) and the setting of
output terminals when each component is approaching the end of its useful life.
Title
Annual average ambient temperature
Note 1: Using
annual highest temperature.
Note 2: Set
Changing the setting may cause a part replacement alarm calculation error.

6.26.18 Rush current suppression relay activation time

: Rush current suppression relay activation time
• Function
This parameter is used to control the rush current suppressing resistor shorting relay when a direct current
is passed or multiple inverters are used with their DC sections connected to each other.
Title
Rush current suppression relay
activation time
The rush current suppressing relay is activated on the expiration of the time limit set with parameter
voltage in the DC section of the inverter has reached the specified level.
DC voltage
Rush current
suppression relay

6.26.19 Motor thermal protection

~
⇒ For details, refer to Instruction Manual (E6581339) specified in Section 6.36.

6.26.20 Braking resistance overload curve

: Braking resistance overload time
⇒ Refer to 5.19 for details.
Function
, enter the annual average temperature around the inverter. Be careful not to enter the
at the time of installation of the inverter, and do not change its setting after the start of use.
Function
: PTC thermal selection
F-55
and that it will display and send out an alarm through
Adjustment range
: -10~+10°C
: +11~+20°C
: +21~+30°C
: +31~+40°C
: +41~+50°C
: +51~+60°C
Adjustment range
~
sec.
ON
E6581386
Default setting
6
Default setting
after the

Advertisement

Table of Contents
loading

Table of Contents