Seal Check And Removal - Ricoh B064 SERIES Service Manual

MFP OPTIONS: B140/B246/D052 SERIES

Seal Check And Removal

[A]

CAUTION
Before you start the installation, you must check the box seals to make
sure that they were not removed after the items were sealed in the box at
the factory.
1. Check the box seals [A] on each corner of the box.
• Make sure that a tape is attached to each corner.
• The surfaces of the tapes should be blank.
Important: If you see "VOID" on the tapes, do not install the components in the
box. Stop the procedure and contact your Sales Division.
2. If the surfaces of the tapes do not show "VOID", remove them from the corners
of the box.
3. After you remove each seal, the "VOID" marks [B] appear. This is normal.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
B692I901.WMF
1-172
CÓPIA NÃO CONTROLADA
[B]
B692I903.WMF
SM