Rev. 01/2007
9. Remove the jumper [A] on the MBU and set it to the ON position.
Important : If the jumper remains at the OFF position this will cause SC672
(Controller Startup Error) to appear.
10. Attach the FCU [B] to the interface board ( x4).
11. Press on the "RICOH" logo at [C] to confirm that the MBU is securely mounted
on the FCU.
SM
CÓPIA NÃO CONTROLADA
[C]
1-207
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B246/D052 SERIES
[B]
B819R106.WMF
B064 Series/B140 Series
/B246 Series/D052 Series
[A]