Ricoh B064 SERIES Service Manual page 255

Hide thumbs Also See for B064 SERIES:

Table of Contents

Rev. 01/2007

5. Go into the SP mode and confirm that the fax SP codes are enabled.

Push [Reset], enter "107", then hold down "Clear/Reset" for at least 3 sec.

At the initial screen, confirm that "Fax SP" is displayed. This indicates that the

machine recognizes the fax unit.

6. Confirm that the date and time setting are correct.

Push [User Tools] then touch "System Settings"> "Timer Settings"> "Set Date"

and "Set Time".

IMPORTANT: To enable Fax Option Type 7500, the following firmware must be

System firmware (v2.04 or later)

Fax firmware (v3.00 or later) and

LCDC firmware (v1.19 or later).

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

MFP OPTIONS: B246/D052 SERIES

B064 Series/B140 Series

/B246 Series/D052 Series

Chapters

Table of Contents

B246 series B140 series D052 series