Duplex Tray Feed - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

6.13.4 DUPLEX TRAY FEED

After inversion:

• If duplex mode is not selected, the duplex junction gate solenoid [A] does not

switch on to open the duplex junction gate [B]. The paper goes to the output

tray or finisher face down.

• If duplex mode is selected, after the paper leaves the inverter, the solenoid

[A] switches on and opens the junction gate [B]. The paper goes down to the

duplex tray.

For details of how the transport rollers [C, D], duplex transport clutch [E (not shown

here)], and duplex inverter sensor [F] control duplex feed, see 6.13.2.

Duplex transport sensors 1, 2, 3 [G] detect jams in the paper path.

B064 Series/B140 Series

/B246 Series/D052 Series

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

B246D871.WMFF

Table of Contents

B246 series B140 series D052 series