Moving The Finisher To A New Location - Ricoh B064 SERIES Service Manual

3000 SHEET FINISHER (B478/B706)
[D]
[A]
B478I006.WMF
9. Attach the shift tray [A] ( x 4) (M3 x 8).
10. Open the front door of the finisher, and remove the screw from the locking
lever, then pull out the locking lever [B].
11. Align the finisher on the joint brackets, and lock it in place by pushing in the
locking lever [B].
NOTE: Before securing the locking lever, make sure that the top edges of the
finisher and the copier are parallel from front to rear as shown [C].
12. Secure the locking lever [B] ( x 1) and close the front door.
13. Connect the finisher cable [D] to the copier.
14. Set the leveling shoes (x 4) under the feet and level the machine.

1.10.3 MOVING THE FINISHER TO A NEW LOCATION

Before you move the finisher, do SP6107-003. This moves all the finisher
mechanisms to their home positions.
After you move the finisher, the mechanisms go back to the ready condition
automatically after you turn the power on.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[C]
1-58
CÓPIA NÃO CONTROLADA
B478I534.WMF
[B]
SM