To Enter And Exit The Service Mode - Ricoh B064 SERIES Service Manual

SERVICE PROGRAM MODE

To Enter and Exit the Service Mode

1. Press "Clear Modes
2. On the operation panel keypad, press .
3. Hold down "Clear/Stop " for more than 3 seconds.
The Copy SP or PM Counter items are displayed. If the printer or
scanner/printer option is installed, the Printer SP and Scanner SP items are
also available.
To enter normal Copy SP mode, press "Copy SP".
4. When you are finished, press "Exit" to exit the SP mode, then press again to
return to the Copier Window.
To Enter and Exit the Super SP Mode
5. Press "Clear Modes
6. On the operation panel keypad, press .
7. Hold down "Clear/Stop " for more than 3 seconds.
The Copy SP or PM Counter items are displayed. If the printer or
scanner/printer option is installed, the Printer SP and Scanner SP items are
also available.
8. Press "Copy SP" and the [#] on the operation panel together.
9. When you are finished, press "Exit" to exit the Super SP mode, then press
"Exit" again to return to the Copier Window.
To Switch to the Copy Window for Test Printing
1. In the SP mode display, press "Copy Window" to switch to the copy operation
screen when you need to select paper for a test print.
2. Use the copy window (copier mode) to select the appropriate settings (paper
size, etc.) for the test print.
3. Press "Start " to execute the test print.
4. Press "SP Mode" (highlighted) to return to the SP mode screen and repeat from
step 1.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA

."

."
5-2
CÓPIA NÃO CONTROLADA
SM