Ricoh B064 SERIES Service Manual page 664

SERVICE PROGRAM MODE TABLES
7504 Finisher (B469: No Saddle Stitch)
101 Finisher 101. Entrance Sensor
When the paper fails to activate the entrance sensor at the precise time or
remains at the entrance sensor for longer than the prescribed time.
102 Finisher 102. Proof Tray Exit Sensor
When the paper fails to activate the proof tray exit sensor at the precise time
after activating the entrance sensor or remains at the proof tray exit sensor for
longer than the prescribed time.
103 Finisher 103. Exit Sensor
When the paper fails to activate the exit sensor at the precise time after
activating the entrance sensor or remains at the exit sensor for longer than the
prescribed time.
104 Finisher 104. Staple Entrance Sensor
When the paper fails to activate the staple entrance sensor at the precise time
after activating the entrance sensor or remains at the staple entrance sensor for
longer than the prescribed time.
105 Finisher 105. Exit Sensor after jogging
When the paper from the jogger unit fails to activate the exit sensor at the
precise time or remains at the exit sensor for longer than the prescribed time.
106 Finisher 106. Stapler Unit 1
When the stapler unit fails to send any signals while stapling.
109 Finisher 109. Shift Motor
When the signal status of the lower tray encoder sensor does not change at the
precise time during motor rotation. Returns SC733
110 Finisher 110. Jogger Fence Motor
When the status of the jogger fence HP sensor does not change at the precise
time during jogger fence motor rotation. Returns SC722.
111 Finisher 111. Shift Roller or Guide Plate Motor
When the status of the shift roller HP sensor does not change at the precise time
during shift roller motor rotation, or the status of the guide plate position sensor
does not change at the precise time during guide plate motor rotation. Returns
SC732, SC736
112 Finisher 112. Stapler Movement or Stapler Rotation Motor
When the status of the stapler HP sensor does not change at the precise time
during stapler movement motor rotation, or the status of the stapler rotation
sensor does not change at the precise time during stapler rotation motor.
Returns SC730, SC727
113 Finisher 113. Stapler Unit 2
Not logged. Returns SC724.
115 Finisher 115. Feed Out Belt Motor
When the status of the feed out belt HP sensor does not change at the precise
time during feed out belt motor rotation. Returns SC725.
116 Finisher 116. Punch Hole Motor
When the status of the punch HP sensor does not change at the precise time
during punch hole motor rotation. Returns SC729
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
5-138
CÓPIA NÃO CONTROLADA
SM