1.23.10 DATA OVERWRITE SECURITY UNIT (B735)
ACCESSORY CHECK
Check the accessories and their quantities against this list:
Description
1. SD Card................................................................................. 1
Before You Begin...
1. Confirm that the Data Overwrite Security unit SD card is the correct type for the
machine. The correct type for this machine is type "C".
Important: If the NVRAM is replaced then the data overwrite security
feature must be replaced with the new data overwrite security option.
2. Make sure that the following settings are not at the factory default settings:
• Supervisor login password
• Administrator login name
• Administrator login password
Important: These settings must be set up by the customer before the Data
Overwrite Security unit can be installed.
3. Confirm that "Admin. Authentication" is on:
[User Tools]> "System Settings"> "Administrator Tools"> "Administrator
Authentication Management"> "Admin. Authentication"> "On"
If this setting is "Off" inform the customer that this setting must be "On" before
you can do the installation procedure.
4. Confirm that "Administrator Tools" is selected and enabled:
[User Tools]> "System Settings"> "Administrator Tools"> "Administrator
Authentication Management"> "Available Settings
NOTE: "Available Settings" is not displayed until Step 2 is completed.
If this setting is not selected,inform the customer that this setting must be
selected before you can do the installation procedure.
SM
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B140/B246/D052 SERIES
1-171
CÓPIA NÃO CONTROLADA
Q'ty
B064 Series/B140 Series
/B246 Series/D052 Series