Selecting The Staple Supply Name; Enabling Booklet Binding (B700 Only) - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

Selecting the Staple Supply Name

Enter the SP mode and execute the following information.

Supply Name Setting

013* Staple Std

022 Staple Bind

To enable booklet binding (saddle-stitching) for the B700, you must select the

center stapling position.

1. Press the User Tools key.

2. Select "Copier/Document Server Features".

3. Select the "Input/Output" tab.

4. Select any "Stapling Position" button then select the center (saddle-stitch)

stapling symbol.

5. Exit the User Tools mode. Specify the number of copies, select the center

stapling symbol on the operation panel, then start the print job.

CÓPIA NÃO CONTROLADA

2000/3000 SHEET FINISHERS (B700/B701)

These names appear when the user prints the Inquiry

List Press the Counter key, then press 'Print Inquiry List'.

Press the Inquiry button on the initial User Tools screen.

Enter the name of the staples in use for normal stapling

(not booklet stapling). This setting should be done for

both the B700 and B701.

Enter the name of the staples in use for booklet stapling

(saddle-stitching). This setting is required only for the

CÓPIA NÃO CONTROLADA

B064 Series/B140 Series

/B246 Series/D052 Series

Table of Contents

B246 series B140 series D052 series