Ricoh B064 SERIES Service Manual page 487

Hide thumbs Also See for B064 SERIES:
Table of Contents

Advertisement

351
C
ID sensor error 2
The ID sensor output voltage is 5.0V
and the PWM signal input to the ID
sensor is 0 when checking the ID
sensor pattern.
352
C
ID sensor error 3
For 2 s during the ID sensor pattern
check, the ID sensor pattern edge
voltage is not 2.5V or the pattern edge
is not detected within 800 ms.
353
C
ID sensor error 4
One of the following ID sensor output
voltages is detected at ID sensor
initialization.
• Vsg < 4.0V when the maximum
PWM input (255) is applied to the ID
sensor.
• Vsg ≥ 4.0V when the minimum
PWM input (0) is applied to the ID
sensor.
354
C
ID sensor error 5
Vsg falls out of the adjustment target
(4.0 ± 0.2V) during Vsg checking.
355
C
ID sensor error 6
The Vp value, which measures the
reflectivity of the ID sensor pattern,
was not in the range of –70V to –400V.
SM
CÓPIA NÃO CONTROLADA
B140/B246/D052 SERIES SERVICE MODE
• ID sensor defective
• ID sensor harness disconnected
• ID sensor connector defective
• IOB defective
• ID sensor pattern not written correctly
• Incorrect image density
• Charge power pack defective
• ID sensor dirty
• ID sensor defective
• ID sensor harness disconnected
• ID sensor connector defective
• IOB defective
• ID sensor pattern not written correctly
• Incorrect image density
• Charge power pack defective
• ID sensor dirty
• ID sensor defective
• ID sensor harness disconnected
• ID sensor connector defective
• IOB defective
• ID sensor pattern not written correctly
• Incorrect image density
• Charge power pack defective
• ID sensor dirty
• ID sensor defective
• ID sensor harness disconnected
• ID sensor connector defective
• IOB defective
• ID sensor pattern not written correctly
• Incorrect image density
• Charge power pack defective
• ID sensor dirty
• Potential sensor defective
• Potential sensor harness defective
• Potential sensor disconnected
• IOB defective
• OPC unit connector defective
• Charge corona power pack defective
• Charge corona wire dirty, broken
4-49
CÓPIA NÃO CONTROLADA
B064 Series/B140 Series
/B246 Series/D052 Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

B246 seriesB140 seriesD052 series

Table of Contents