Td Sensor - Ricoh B064 SERIES Service Manual

3.7.4 TD SENSOR

Development unit (
[A]: TD sensor ( x 1)
• Before installing a new TD sensor, clean the TD sensor port [B].
• After replacing the TD sensor, do the following SPs
SP2801 TD Sensor Initial Setting
SP2962 Auto Process Control (only if SP3901 – Auto Process Control – is
on).
3.7.5 TONER END SENSOR
Development unit (
[A]: Toner hopper ( x 2)
[B]: Toner end sensor ( x 2)
• Remove the screws carefully to avoid stripping the holes.
• Before installing a new toner end sensor, clean the toner end sensor port
[C].
SM
CÓPIA NÃO CONTROLADA
[B]
3.6.1)
[B]
[C]
3.6.1)
3-51
CÓPIA NÃO CONTROLADA
DEVELOPMENT UNIT
[A]
B246R970.WMF
[A]
B246R971.WMF
B064 Series/B140 Series
/B246 Series/D052 Series