Rev. 01/2007
12. Attach the G3 interface unit ( x3)
NOTE : The illustration on the left shows the single G3 board installation and
the illustration on the right shows the dual G3 board installation.
13. Connect the CCUIF harness
NOTE : The illustration on the left shows the single G3 board installation and
the illustration on the right shows the dual G3 board installation.
14. Reinstall all covers and reconnect the ADF cable.
15. Attach the FCC decal to the rear cover of the machine.
SM
CÓPIA NÃO CONTROLADA
B820R108.WMF
B820R110.WMF
to the CCU drive board
1-221
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B246/D052 SERIES
and CCU I/F
B064 Series/B140 Series
/B246 Series/D052 Series
B820R109.WMF
B820R111.WMF
.