Ricoh B064 SERIES Service Manual page 558

Hide thumbs Also See for B064 SERIES:
Table of Contents

Advertisement

SERVICE PROGRAM MODE TABLES
003
OHP (Center Thermistor)
004
OHP (End Thermistor)
(B140)
005
Thick Paper (Center
Thermistor)
006
Thick Paper (End
Thermistors) (B140)
007
Normal Paper (Center
Thermistor) (B140)
008
Normal Paper (End
Thermistor) (B140)
009
Small Size – Normal Paper
(Center)
010
Small Size – Thick Paper
(Center)
1106
Fusing Temperature Display
001
Center Temperature
002
End Temperature
1107
Start Fusing Temperature Adjustment (B246)
This SP allows you to set when to start the fusing temperature adjustment for the
center and end heating lamps.
001
Center Lamp Temperature
002
End Lamp Temperature
003
Center Lamp Actual Time
004
End Lamp Actual Time
005
Center Lamp Temp (Small Size Paper)
006
End Lamp Actual Time (Small Size Paper)
007
Center Lamp Temp (Thick Paper)
008
End Lamp Actual Time (Thick Paper)
1008*
Duplex Fence Adjustment
Adjusts the distance between front and rear fences. A smaller value shortens the
distance. If the fences are too far apart, skewing may occur in the duplex tray. If
the fences are too close, the paper may be creased in the duplex unit.
[–5~+5/0.1 mm]
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
Fusing temperature during printing:
B064: [150~230/1 degree C]
B140: [180~205/1 degree C]
Fusing temperature during printing:
B140: [180~205/1 degree C]
Fusing temperature during printing:
B064: [180~205/1 degree C]
B140: [180~205/1 degree C]
Fusing temperature during printing:
B140: [180~205/1 degree C]
Fusing temperature during printing:
B140: [150~230/1 degree C]
Fusing temperature during printing:
B140: [180~205/1 degree C]
Fusing temperature at center of hot roller when
printing on normal paper:
B246: [180~205/1 degree C]
Fusing temperature at center of hot roller when
printing on thick paper:
B246: [180~205/1 degree C]
Shows the temperature of the hot roller detected by the
thermistor at the center of the hot roller.
Shows the temperature of the hot roller detected by the
thermistors at the ends of the hot roller.
5-32
CÓPIA NÃO CONTROLADA
[180~205/205/1 deg C]
[0~120/60/1 sec.]
[190~205/205/1 deg C]
[0~120/60/1 sec.]
[190~205/205/1 deg C]
[0~120/60/1 sec.]
SM

Advertisement

Table of Contents
loading

This manual is also suitable for:

B246 seriesB140 seriesD052 series

Table of Contents