Ricoh B064 SERIES Service Manual page 634

Hide thumbs Also See for B064 SERIES:
Table of Contents

Advertisement

SERVICE PROGRAM MODE TABLES
062
Complexity Option 1
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to upper case and sets the
length of the password.
[0~32/1]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
063
Complexity Option 2
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to lower case and defines the
length of the password.
[0~32/1]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
064
Complexity Option 3
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to numbers and defines the
length of the password.
[0~32/1]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
065
Complexity Option 4
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to symbols and defines the
length of the password.
[0~32/1]
Note:
• This SP does not normally require adjustment.
• This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
090
Plain Data Forbidden
Lets you to prevent the address from transmission as plain data. This is a
security function that prevents unauthorized access to address book data.
[0~1/1]
0: No check. Address book data not protected.
1: Check. Enables operation of UCS without data from HDD or SC card and
without creating address book information with plain data.
091
FTP Auth. Port Settings
Sets the FTP port to get the delivery server address book that is used in the
individual authorization mode.
[0~65535/1]
094
Encryption Start
Shows the status of the encryption function of the address book on the LDAP
server.
[0~255/1] No default
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
5-108
CÓPIA NÃO CONTROLADA
SM

Advertisement

Table of Contents
loading

This manual is also suitable for:

B246 seriesB140 seriesD052 series

Table of Contents