Attaching The Corner Plates For The B706 - Ricoh B064 SERIES Service Manual

COVER INTERPOSER TRAY (B704)

Attaching the Corner Plates for the B706

Important!: The corner plates are installed on the B706 only.
Right Rear Corner Plate (B706 only)
NG
[A]
1. Temporarily attach the screws [A] (with about two turns) to the right end of the
finisher extension table [B] ( x 2, tapping M4 x 8).
NOTE: The holes are not visible because they are covered with tape. Just
punch the screws through the holes.
2. Align the cutouts [C] of the right rear corner plate [D] with the screws and attach
the plate.
3. With a long screw driver inserted through the cutouts in the right rear corner
plate [D], tighten the screws to fasten the right rear corner plate to the table
extension [B].
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
OK
[B]
1-98
CÓPIA NÃO CONTROLADA
[C]
[D]
B704I112.WMF
SM