Ricoh B064 SERIES Service Manual page 650

SERVICE PROGRAM MODE TABLES
6105 Jogger Fence Fine Adjust (B246/D052)
This SP adjusts the distance between the jogger fences and the sides of the stack
on the finisher stapling tray. The adjustment is done perpendicular to the direction of
paper feed.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 Custom Size
6106 Adjust Output Jog Position (B246/D052)
Use this SP code to adjust the positions of the jogger fences when the pages are
aligned (jogged) horizontally in the stapling tray for stapling in the booklet finisher.
The jogger fences close in on the sides of the stack on the paper tray. These side
fences move in and out perpendicular to the direction of paper feed.
[-3 to +3 / 0 / 0.1 mm]
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as tight.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 LEF
006 A5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 HLT LEF
012 Other
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[-1.5 to +1.5/0/0.5 mm]
+ Value: Increases distance between jogger fences
and the sides of the stack.
- Value: Decreases the distance between the jogger
fences and the sides of the stack.
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
5-124
CÓPIA NÃO CONTROLADA
SM