Ricoh B064 SERIES Service Manual page 678

SERVICE PROGRAM MODE TABLES
8001 T:Total Jobs
8002 C:Total Jobs
8004 P:Total Jobs
8005 S:Total Jobs
8006 L:Total Jobs
• These SPs reveal the number of times an application is used, not the number of
pages processed.
• When an application is opened for image input or output, this counts as one job.
• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
• Only jobs executed by the customer are counted. Jobs executed by the customer
engineer using the SP modes are not counted.
• When using secure printing (when a password is required to start the print job),
the job is counted at the time when either "Delete Data" or "Specify Output" is
specified.
• When a copy job on the document server is printed, SP8022 also increments,
and when a print job stored on the document server is printed, SP8024 also
increments.
• When an original is both copied and stored on the document server, the C: and
L: counters both increment.
• When a print job is stored on the document server, only the L: counter
increments.
• When the user presses the Document Server button to store the job on the
document server, only the L: counter increments.
• When the user enters document server mode and prints data stored on the
document server, only the L: counter increments.
• When an image received from Palm 2 is received and stored, the L: counter
increments.
• When the customer prints a report (user code list, for example), the O: counter
increments
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
These SPs count the number of times each
application is used to do a job.
[0~9999999/1]
Note: The L: counter is the total number of
times the other applications are used to send a
job to the document server, plus the number of
times a file already on the document server is
used.
5-152
CÓPIA NÃO CONTROLADA
SM