PUNCH UNIT (B377)
⇒
1.7.2 INSTALLATION PROCEDURE
CAUTION
Switch off the main machine and unplug its power cord.
1. If the finisher is connected to the machine,
disconnect it.
2. Unpack the punch unit and remove all
tapes and shipping retainers.
3. Open the front door and remove the rear
cover [A] ( x 4).
4. Remove the bracket [B] ( x 2) and
paper guide [C] ( x 1).
5. Remove the plastic knockout [D].
6. Install the sensor arm [E] ( x 1).
7. Install the spring [F].
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[D]
1-42
CÓPIA NÃO CONTROLADA
[C]
[B]
[F]
Rev. 04/2008
[A]
B377I201.WMF
B377I103.WMF
[E]
B377I202.WMF
SM