7. Remove the paper guide [A] ( x 4).
8. Install the sensor arm [B] ( x 1, small step screw (M3 x 4).
NOTE: Make sure that the sensor arm swings freely on the step screw.
9. Attach the spring [C].
SM
CÓPIA NÃO CONTROLADA
[A]
B531I003.WMF
1-61
CÓPIA NÃO CONTROLADA
PUNCH UNIT (B531/B812)
B531I004.WMF
B064 Series/B140 Series
/B246 Series/D052 Series
[B]
[C]