Ricoh B064 SERIES Service Manual page 164

COPY CONNECTOR KITS
[C]
[A]
8. Lead the interface cable [AI] through the anti-static cap [BJ], and then connect
it to the interface board.
9. Attach the anti-static cap (2 knob screws [C]).
10. Replace the key top [D].
11. Repeat both the firmware and hardware procedures above for the other copier.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[B]
[D]
1-124
CÓPIA NÃO CONTROLADA
B110I204_RTB.WMF
B110I103_RTB.WMF
SM