Transfer Belt Unit - Ricoh B064 SERIES Service Manual

TRANSFER BELT UNIT

3.8 TRANSFER BELT UNIT
3.8.1 TRANSFER BELT UNIT
NOTE: Before you begin, spread a mat or some clean paper on the floor where
you intend to set the transfer belt unit.
1. Remove the OPC drum unit (
2. Disconnect the transfer belt unit [A] ( x 1).
3. Remove the transfer belt unit stay [B] ( x 1).
4. While supporting the transfer belt unit with your hand, turn the release lever [C]
counter-clockwise to release it, then pull the transfer belt unit out of the
machine.
NOTE: The transfer belt unit can be
removed without removing
the OPC drum unit.
However, the transfer belt
unit must be removed
carefully to avoid scratching
the surface of the transfer
belt on the OPC drum unit
[D] above. Avoid touching
the belt with bare hands.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[C]
[A]
3.6.5).
[D]
3-54
CÓPIA NÃO CONTROLADA
[B]
B246R976.WMF
B246R977.WMF
SM