Ricoh B064 SERIES Service Manual page 667

135 Finisher 135. Feed Out Belt Motor
When the status of the feed out belt HP sensor does not change at the precise
time during feed out belt motor rotation. Returns SC725
136 Finisher 136. Punch Hole Motor
When the status of the punch HP sensor does not change at the precise time
during punch hole motor rotation. Returns SC729
7504 SR4000 (Corner Stapling, Booklet Stapling) (B246/D052)
121 Finisher 121. Finisher Entrance Sensor
When the paper fails to activate the entrance sensor at the precise time or
remains at the entrance sensor for longer than the prescribed time.
122 Finisher 122. Proof Tray Exit
When the paper fails to activate the proof tray exit sensor at the precise time
after activating the entrance sensor or remains at the proof tray exit sensor for
longer than the prescribed time.
123 Finisher 123. Finisher Exit
When the paper fails to activate the exit sensor at the precise time after
activating the entrance sensor or remains at the exit sensor for longer than the
prescribed time.
124 Finisher 124. Staple Tray
When the paper fails to activate the staple entrance sensor at the precise time
after activating the entrance sensor or remains at the staple entrance sensor
for longer than the prescribed time.
125 Finisher 125. Jogging Tray
When the paper from jogger unit fails to activate the exit sensor at the precise
time or remains at the exit sensor for longer than the prescribed time.
126 Finisher 126. Corner Stapler
When the stapler unit fails to send any signals while stapling.
127 Finisher 127. Booklet Stapler
Finisher : When the booklet stapler fails to send any signals during stapling.
128 Finisher 128. Fold Unit
When the status of the paper position does not change at the precise time during
paper folding.
129 Finisher 129. Shift Tray
When the status of the upper tray limit sensor does not change at the precise
time while lifting the upper exit tray, the status of the upper tray full sensor does
not change at the precise time while lowering the upper exit tray, or the status
of the lower tray encoder sensor does not change at the precise time while
moving the lower tray. Returns SC733, SC726
130 Finisher 130. Jogger Fences
When the status of the jogger fence HP sensor does not change at the precise
time during jogger fence motor rotation. Returns SC722
131 Finisher 131. Shift Roller or Guide Plate Motor
When the status of the shift roller HP sensor does not change at the precise
time during shift roller motor rotation, or the status of the guide plate position
sensor does not change at the precise time during guide plate motor rotation.
Returns SC732, SC736
132 Finisher 132. Stapler Movement or Stapler Rotation Motor
When the status of the stapler HP sensor does not change at the precise time
during stapler movement motor rotation, or the status of the stapler rotation
sensor does not change at the precise time during stapler rotation motor.
Returns SC730, SC727
133 Finisher 133. Stapler Unit
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
5-141
CÓPIA NÃO CONTROLADA
B064 Series/B140 Series
/B246 Series/D052 Series