Installation - Ricoh B064 SERIES Service Manual

Installation (B246 Series)
[B]
[A]
• Disconnect ADF cable
Remove:
• Rear upper cover ( x2) ( 3.3.5)
• Rear lower cover ( x2) ( 3.3.5)
• Controller box cover ( x13)
1. If a file format converter board [A] is installed in slot A2, remove it (Knob  x2).
2. Remove the slot cover [B] of slot A1 ( x2).
3. Remove the file format converter mount [C] ( x2).
4. Remove the lower board slot face plate [D] ( x3).
5. Insert the Tandem/FCU mount [E] and fasten it ( x3).
• Confirm that the edge connector fastened to the mother board before you
fasten the screws.
SM
CÓPIA NÃO CONTROLADA
[C]
B842I102.WMF
[D]
1-133
CÓPIA NÃO CONTROLADA
COPY CONNECTOR KITS
B842I103.WMF
[E]
B064 Series/B140 Series
/B246 Series/D052 Series