Installation Procedure - Ricoh B064 SERIES Service Manual

1.16.2 INSTALLATION PROCEDURE

The Cover Interposer Tray B704 can be installed on the following finishers only:
• 2000-Sheet Booklet Finisher B700
• 3000-Sheet Finisher B701
• 3000-Sheet Finisher B706
Removing Tape and Retainers

WARNING!
Make sure that the finisher is disconnected from the main machine and that
the copier is switched off and unplugged before starting the following
procedure.
1. If the finisher is connected to the machine, disconnect it.
2. Remove all tape and retainers from the cover interposer tray [A].
3. Remove the tape and cardboard [B] from the ground connector.
SM
CÓPIA NÃO CONTROLADA
1-91
CÓPIA NÃO CONTROLADA
COVER INTERPOSER TRAY (B704)
[A]
[B]
B704I102.WMF
B064 Series/B140 Series
/B246 Series/D052 Series